Base serum, soft and smooth, absorbs quickly. When spread evenly on the skin, it can be absorbed into the skin immediately within seconds. Can be mixed with water (and ingredients dissolved in water) in a ratio of 30-90%. and will immediately become a serum ( please study the mixing method in detail below )

Light serum base, soft and smooth, and absorbs quickly. When spread evenly on the skin, it can be absorbed into the skin immediately within seconds. Can be mixed with water (and ingredients dissolved in water) in a ratio of 30-90% and will immediately become a serum ( please study the mixing method carefully below )

Silky Serum Base can be used all over the face and around the eyes.

Silky Serum Base cannot bind oils. If the formula also has a proportion of oil Please choose to use Silky Serum Base Plus instead.

**Adding 1% NaCl (pure salt) to the formula will help increase the stability of the formula well. In the event that it is found There is a separation of layers when left standing. Or it is recommended to use 1% in every formula that uses Silky Serum Base as a base by blending it to dissolve into the formula in the final step**

Examples of products that can be developed using Silk Serum Base

- Liquid serum, light, soft, smooth, absorbs quickly into the skin. (Use an approximate ratio: serum base 35% water and water-soluble ingredients 65%)

-Serum is thick but light, soft, smooth and absorbs quickly into the skin. (Use an approximate ratio: water and water-soluble ingredients 90% , serum base 10% )

Packaged in a jar, no gel added, no color, no scent, no perfume. No preservatives But if mixed with water To make it into ready-made serum Must add preservatives

Skin-Feel - feeling after application

The serum texture is very light and soft. When spread all over, it will disappear within a short time. Suitable for cosmetic formulas that require lightness. and exceptionally soft and smooth Suitable for oily skin or normal skin Not suitable for dry skin

How to mix to get serum texture

- Can be mixed with water. If mixed with water Can add 30-90% water to the formula.

-If you want the serum to be more liquid, add Cyclomethicone or Dimethicone to the formula to get a more liquid texture.

-Using water in a greater proportion It will make the serum even thicker. If there is 30% water, the serum will be liquid. And if there is 70% water, the serum will be thick like a heavy cream (but when applied, it can be quickly absorbed into the skin).

-In the mixing process Water should be added to the base, a little at a time, and stir well. before adding more water If you add a lot of water at once It will make it more difficult for the base to form a serum texture. (Takes longer to stir) But there was no problem at all)

- Can be used with ingredients that contain electrolyte without problems.

- Should add 1% Magnesium Sulfate to help increase the stability of the formula. By adding it to the last step of the formula. Then blend until dissolved and combined with the formula. It will help prevent layer separation well.

The viscosity of the serum obtained Depends on the amount of water The amount of serum base and the amount of cyclomethicone , dimethicone if desired to make the viscosity thicker. Increase the proportion of water. If you want it to be more liquid, add cyclomethicone , dimethicone to the recipe.

Very important : in the process of adding water to the serum base Divide adding water into several parts. Add water little by little to the serum base. and stir well first So add the remaining water [in small increments]. Do this until you add all the water. Avoid adding large quantities of water to the serum base at one time. Because it will make it difficult for people to get along with each other. Except if you have a blender You can add water at once and blend for 5-10 minutes at a minimum speed. 500 rpm

Product age

The product has a shelf life of at least 5 years and should not be stored at temperatures exceeding 30 degrees and should not be exposed to direct sunlight. Because it will cause the ingredients to lose quality.

INCI: Cyclomethicone, Dimethicone/Vinyl Dimethicone Crosspolymer, PEG-10 Dimethicone