PatchMate™ NP-700
- Product Code: 125173
designed for transdermal patch formulation. Can also be used as thickener in some formulation such as ointment
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
| Test Name | Specification |
|---|---|
| Character | White powders |
| Viscosity (20°C±0.1°C) | 350mPa·s~750mPa·s |
| Generate white precipitation | Consistent with the regulations |
| Identification | Infrared spectrophotometry attenuation total reflection (ATR) has absorption peaks near 1560cm?¹, 1410cm?¹, 1325cm?¹ wave number |
| Identification reaction of the sodium salt in the filtrate | Consistent with the regulations |
| pH | 5.5~7.5 |
| Alkali | Conform to regulations |
| Sulfate | Conform to regulations |
| Heavy Metal | ?20ppm |
| Arsenic Salt | ?0.00015% |
| Acryl Residue Monomer | ?1.0% |
| Low Polymer | ?5.0% |
| Loss on Drying | ?5.0% |
| Residue on Ignition | 30.0%~55.0% |
| Assay | 10%~19% (anhydrous substance) |
| Total Aerobic Count | ?10³cfu/g |
| Molds and Yeasts | ?10cfu/g |
PatchMate™ NP-700 (Sodium Polyacrylate) designed for transdermal patch formulation. Can also be used as thickener in some formulation such as ointment
NP-700: pH is 6.2-6.8, viscosity 500-650mpa.s., AA:AS = 50:50, Highly adhesive due to low content of Sodium Acrylate
Suitable for drug stabilization (such as salicylic acid ointment), Enhances transdermal absorption due to its adhesive property.
To be cross-linked with: Aluminium glycinate , Aluminum hydroxide
Example Formulation:
PatchMate (NP-600/NP-700/NP-800) 5%
Aluminum Hydroxide 0.5%
Disodium EDTA 0.1%
Tartaric Acid 1%
Glycerin 30%
Water 63.4%
Usage: For adding viscosity (thickener) to patch or formulation that require high viscosity
Mixing method: Mix in water (water-phase)
Usage rate: 0.1-5% (according to desired viscosity)
Product characteristics: White powder
Solubility: Can dissolve in water Please see the mixing method above.
Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat. Do not expose to moisture. (Please store in the envelope that comes with a moisture-proof envelope.) The product has a minimum shelf life of 2 years.
INCI Name : Sodium Polyacrylate
Be the first to review this product :-)
Recommend Lab-Service
| Lab Service | Price |
|---|
PatchMate™ NP-700
designed for transdermal patch formulation. Can also be used as thickener in some formulation such as ointment
PatchMate™ NP-700 (Sodium Polyacrylate) designed for transdermal patch formulation. Can also be used as thickener in some formulation such as ointment
NP-700: pH is 6.2-6.8, viscosity 500-650mpa.s., AA:AS = 50:50, Highly adhesive due to low content of Sodium Acrylate
Suitable for drug stabilization (such as salicylic acid ointment), Enhances transdermal absorption due to its adhesive property.
To be cross-linked with: Aluminium glycinate , Aluminum hydroxide
Example Formulation:
PatchMate (NP-600/NP-700/NP-800) 5%
Aluminum Hydroxide 0.5%
Disodium EDTA 0.1%
Tartaric Acid 1%
Glycerin 30%
Water 63.4%
Usage: For adding viscosity (thickener) to patch or formulation that require high viscosity
Mixing method: Mix in water (water-phase)
Usage rate: 0.1-5% (according to desired viscosity)
Product characteristics: White powder
Solubility: Can dissolve in water Please see the mixing method above.
Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat. Do not expose to moisture. (Please store in the envelope that comes with a moisture-proof envelope.) The product has a minimum shelf life of 2 years.
INCI Name : Sodium Polyacrylate
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |
Cart
No products
Subtotal:
฿0.00
฿0.00
Total :