Cream-forming agent That can hold oil in the formula from 1% up to 80%. It has a high ability to create a polymeric structure, making it able to hold oil up to 80% in the formula and still have high stability.

Cream-forming agent That can hold oil in the formula from 1% up to 70%. It has a high ability to create a polymeric structure, making it able to hold oil up to 70% in the formula and still have high stability.

If you want to increase the viscosity of the oil. Still wanting the clarity of the oil Please consider using the Oil Thick group instead:

- Sugar Gel provides an oil gel texture. The texture is soft and clear and must contain 10% water in the formula. Suitable for gel formulas. that can contain a small amount of water in the formula Cannot be used with Silicone

- Oil Thick™ Soft provides an oil gel texture. The texture is soft and translucent (not even 100% clear) without the ability to contain water in the formula. Suitable for cream formulas . Can be used with Silicone.

- Oil Thick™ Hard provides an oil gel texture. The texture is semi-solid and translucent (not even 100% clear) without the ability to contain water in the formula. Suitable for balm, pressed powder formulas with a semi-solid texture. Can be used with Silicone.

- Oil Stick™ Medium provides an oily texture. The texture is hard (1-2%) to very hard (4%) and can give a clear texture. There cannot be water in the formula. Suitable for stick formulas such as lip stick, deodorant stick (should be used with Oil Stick™ Hard to make the texture clear). Can be used with Silicone (but it will not make the texture clear).

- Oil Stick™ Hard Give the texture of oil. Texture: hard (1-2%) to very hard (4%) Can give clear texture There cannot be water in the formula. Suitable for stick formulas such as lip stick, deodorant stick (should be used together with Oil Stick™ Hard to make the texture clear) Can be used with Silicone (but will not give a clear texture)

- Oil Thick™ Clear gives a clear oil texture. in almost every type of oil and LipidSoft™ is easy to use. Cannot be used with Silicone. Cannot contain water in the formula.

Tall samples that require a large amount of oil

- Lip Treatment Cream (Oil is the main component with a small water content of 20-30%)

- Super High Protection UV Sunscreen (contains very high amounts of organic sunscreen and physical sunscreen, including oils or silicones in the formula. to help waterproof)

Example of an oil cream recipe Containing high levels of oil up to 70% requires the use of an Oil Cream Maker™ for cementation, as other types of Cream Makers cannot work with high levels of oil.

Oil Cream Maker™ 0.3%

Mineral Oil 70%

Water 29.1%

Triethanolamine 0.6% (must always be used in the formula (The proportion is equal to 2 times that of Oil Cream Maker™)

Mixing steps (Please follow the steps in detail)

1. Mix Oil Cream Maker™ with the oil mixture. From the example formula above, it is Mineral Oil by blending it together for at least 5 minutes at a speed of at least. 1,000 rpm

2. Mix water with Triethanolamine (Triethanolamine Must always be used together with Oil Cream Maker™, with the proportion equal to 2 times that of Oil Cream Maker™)

3. Blend the water and slowly add the prepared oil portion. into the water, a little at a time, until it's all gone (must use a blender with enough power By cycling at least 1000 rpm Cannot use human hands, but must not exceed 3000 rpm)

Restrictions on use

- The pH of the formula should be at the level 4.0-8.0.

- Oil Cream Maker™ does not tolerate high electrolytes. If the formula contains electrolyte, a larger amount of Oil Cream Maker™ may be needed.

- Using the Oil Cream Maker™ to create a creamy texture. A blender is required. It cannot be stirred by hand, as the Oil Cream Maker™ requires sufficient agitation force to bind the oil with the water. and create a creamy texture

Usage: As a cream binder (emulsifier) or thickener in creams, lotions, serums.

Mixing method: Mix in oil-phase. Please study the instructions carefully before use. Using the Oil Cream Maker™ requires a blender with a minimum speed. 1000 rpm (but not more than 3000 rpm) in mixing

Usage rate: 0.2-1.0% (select according to the amount of oil that needs to be cemented and the desired viscosity is recommended at 0.3-0.4%. Using more will make the cream thicker)

Product characteristics: Light weight white powder

Solubility: Can be dispersed in oil.

Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.

INCI Name : ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER