Creamy binder (emulsifier) and thickener (thickener) that do not require heat. Can be used in the pH range between 2.5-11 and can contain up to 10% oil. Easy to use, just mix in oil-phase if there is oil-phase or can be mixed in water-phase if there is no oil-phase ( which will act as a thickener)

Easy Cream Maker™ is an emulsifier and thickener that can be used without heat. It can be used in the pH range between 2.5-11 and can contain up to 10% oil. Easy to use. Just mix in oil-phase if there is oil-phase or you can mix in water-phase if there is no oil-phase (which will act as a thickener).

Differences between Light Cream Maker™ and Easy Cream Maker™

-Easy Cream Maker™ cannot tolerate electrolyte (electrolyte substances are any substances that have Sodium, Magnesium, Calcium, Potassium in them such as Sodium Lactate, Sodium PCA, Natural Moisturizing Amino Acids (because they contain Sodium PCA), Zinc PCA, DMAE, Azelaic Acid and Aloe Vera Extract, including many natural extracts. Because in these natural extracts there is often Sodium/Magnesium/Calcium/Potassium found in the plant), unlike the Light Cream Maker™, it can be used to create a creamy texture in formulas that contain electrolytes.

- Easy Cream Maker™ is cheaper than Light Cream Maker™.

- Easy Cream Maker™ produces a cream with a heavier texture than Light Cream Maker™. a little

- Easy Cream Maker™ binds no more than 10% of oil in a formula. If you want to use more than 10% of oil in a formula, you must use the Light Cream Maker™. instead

For beginners Not sure if you can use the Easy Cream Maker™ to create cream? It is recommended to opt for the Light Cream Maker™ first as it is much less restrictive. Can create a creamy texture in almost any case.

Easy Cream Maker™ uses exactly the same as Light Cream Maker™ , except it does not tolerate the electrolyte in the formula, even though it is used in larger amounts. Including the texture, it feels slightly gooey like Light Cream Maker™.

Usage: As a cream binder (emulsifier) or thickener in creams, lotions, serums, or gels.

Mixing method: Mix in oil-phase, stir well with the oil part. Then add water to the formula. stir continuously You'll get a creamy texture within 1-3 minutes. You shouldn't over blend. 2500 rpm This will damage the polymer and weaken the formula.

Usage rate: 1-5% (select according to the amount of oil that needs to be cemented and desired viscosity recommended 1-2%)

Product appearance: thick clear turbid liquid

Solubility: Can dissolve in water, oil.

Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.

INCI Name : Polyacrylamide & C13-14 Isoparaffin & Laureth-7

Examples of products that use Easy Cream Maker™ to create cream texture.

Oriental Princess : Natural Intensive C, Skin Boosting Serum

Olay White Radiance UV Whitening Cream SPF 19