Create spray emulsion or emulsion with high liquidity. Until it can spray out well. and does not separate layers when left aside

Spray Maker™ is used to create spray emulsion or emulsion with high liquidity. Until it can spray out well. and does not separate layers when left aside

Example of making sunscreen spray with Spray Maker™

Part A:

Water 43%

Glycerin 3%

Part B:

Homosalate 10%

Octocrylene 10%

Spray Maker™8%

Part C:

Water 20%

Safe-B3 5%

Microcare PHC 1%

Mixing method:

1. Mix Part A together and heat until Part A 75-80c will be a clear liquid ( disperser ).

2. Heat Part B to 70-75c, stir until combined, it will be a slightly cloudy liquid.

3. When Part B has a temperature of 70-75c, blend with a Homogenizer 7,000-14,000 RPM and pour Part A with a temperature of 75-80c into Part B by pouring in a continuous and slow stream. When completely poured, blend for another 20-30 minutes. When complete, set aside to cool down at room temperature. Let the temperature remain at 45c.

4. Mix Part C together. Pour into Part A+B. Mix well with disperser to get Part A+B+C.

5. Pour Part D into Parts A+B+C and blend until combined.

(Passed centrifuge test 4000RPM 30Min, no separation)

Usage: As a cream binder (emulsifier)

Mixing method: Dissolve in oil. Suitable for formulas with a pH range of 3.0-10.0.

Usage rate: 5-10% (recommended 8%)

Product characteristics: Yellow-light brown creamy consistency.

Solubility: soluble in oil

Storage: Can be stored at room temperature. But close the bottle cap tightly. Then completely protected from sunlight or heat. The product has a minimum shelf life of 2 years.

INCI Name : Polyglyceryl-10 Stearate, Polyglyceryl-3 Caprylate, C12-15 alkyl benzoate