Total dissolved solids meter to test the purity of water used in cosmetic production.

Suitable for use in connection with DI water production system to check the incoming and outgoing water bills. 

Total dissolved solids meter to test the purity of water used in cosmetic production.

Suitable for use in connection with DI water production system to check the incoming and outgoing water bills.

The water used in the manufacture of cosmetics should have a TDS value of not more than 20ppm (interpretation: should not contain more than 20 parts per million of water additives) before using any water. Used to produce cosmetics Should measure the water value to ensure that the water used does not contain any additives that exceed this set value

Specifications

Range: 0 to 9990 ppm; Two ranges 0 to 9990 ppm (from 0 to 999 ppm, resolution is 1 ppm, from 1000 to 9990 ppm, resolution is 10 ppm, indicated by a blinking 'x10' image..)