Bubble Max™
- Product Code: 1210
automatic foaming agent When on the surface (Micro Bubble Generator) can help act. can deep-cleansing
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
| Test Name | Specification |
|---|---|
| Appearance | Clear colorless liquid |
| Odor | Slight characteristic odour |
| Purity (Ethoxynonafluorobutane, by GC) | Minimum 99% (by area) |
| Heavy Metals | 20ppm Max |
| Arsenic | 2ppm Max |
Bubble Max™ Automatic foaming agent When on the surface (Micro Bubble Generator) can help act. can deep-cleansing
when on the skin The bubbles will gradually form spontaneously. It can be made in formulations of skin creams, cleansers and masks.
Examples of products used Bubble Max™ (All are products in the Korean market because the manufacturer Bubble Max™ is in Korea)
WARNING: There is a procedure for using Bubble Max™. Please follow all steps.
1. The optimum usage rate is at 5-8%.
2. Bubble Max™ can be evaporated at room temperature. Therefore, it should be kept in a cool place. in weighing and mixing in the formula should be done in a cool place This prevents the evaporation of Bubble Max™, which can result in the wrong formula ratio.
3. Add it to the formula in the last step. Do not heat more than 40 degrees (recommended below 30 degrees). Do not mix in a vacuum pot. Must be added to a normal blender. Blend at low speed just to combine with the recipe.
4. Finished products that use Bubble Max™ in formulations should be packaged in airtight containers. Do not allow air to enter or exit easily. This prevents the evaporation of Bubble Max™ from the formula.
5. In the formula there must be detergent to react with Bubble Max™ for automatic foaming, but if no detergent is needed. Bubble Max™ in a very high volume (25-35%) for foaming.
Bubble Max™ can be added to any formulation of liquid soaps, shampoos, cleansers, moisturizers, skin gels, but should be added at the last step. and gently stir together
The company sells 2 types of bubble generator ingredients.
1. Bubble Max™ Automatically generates a lot of bubbles, but the price is high.
2. Dimethicone 1Secs Automatic foaming, moderate, but economical.
Use: For skin cleansing or skin care products
Mixing method: mix in the recipe in the last step
Usage rate: 5-8%
Product characteristics: colorless liquid can volatilize
Solubility: can be dispersed in the formula
Storage: can be stored in the refrigerator Protected from sunlight and heat, the product has a shelf life of at least 2 years. **Always close the lid tightly. Because it can easily evaporate**
INCI Name : Methyl Perfluorobutyl Ether (and) Methyl Perfluoroisobutyl Ether
Be the first to review this product :-)
Example recipes using this ingredient:
- › lock_outlineT. Stan’s Pigment Corrector
- › lock_outlineCysteamine Cream
Recommend Lab-Service
| Lab Service | Price |
|---|
Bubble Max™
automatic foaming agent When on the surface (Micro Bubble Generator) can help act. can deep-cleansing
Bubble Max™ Automatic foaming agent When on the surface (Micro Bubble Generator) can help act. can deep-cleansing
when on the skin The bubbles will gradually form spontaneously. It can be made in formulations of skin creams, cleansers and masks.
Examples of products used Bubble Max™ (All are products in the Korean market because the manufacturer Bubble Max™ is in Korea)
WARNING: There is a procedure for using Bubble Max™. Please follow all steps.
1. The optimum usage rate is at 5-8%.
2. Bubble Max™ can be evaporated at room temperature. Therefore, it should be kept in a cool place. in weighing and mixing in the formula should be done in a cool place This prevents the evaporation of Bubble Max™, which can result in the wrong formula ratio.
3. Add it to the formula in the last step. Do not heat more than 40 degrees (recommended below 30 degrees). Do not mix in a vacuum pot. Must be added to a normal blender. Blend at low speed just to combine with the recipe.
4. Finished products that use Bubble Max™ in formulations should be packaged in airtight containers. Do not allow air to enter or exit easily. This prevents the evaporation of Bubble Max™ from the formula.
5. In the formula there must be detergent to react with Bubble Max™ for automatic foaming, but if no detergent is needed. Bubble Max™ in a very high volume (25-35%) for foaming.
Bubble Max™ can be added to any formulation of liquid soaps, shampoos, cleansers, moisturizers, skin gels, but should be added at the last step. and gently stir together
The company sells 2 types of bubble generator ingredients.
1. Bubble Max™ Automatically generates a lot of bubbles, but the price is high.
2. Dimethicone 1Secs Automatic foaming, moderate, but economical.
Use: For skin cleansing or skin care products
Mixing method: mix in the recipe in the last step
Usage rate: 5-8%
Product characteristics: colorless liquid can volatilize
Solubility: can be dispersed in the formula
Storage: can be stored in the refrigerator Protected from sunlight and heat, the product has a shelf life of at least 2 years. **Always close the lid tightly. Because it can easily evaporate**
INCI Name : Methyl Perfluorobutyl Ether (and) Methyl Perfluoroisobutyl Ether
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |
Cart
No products
Subtotal:
฿0.00
฿0.00
Total :