PEG-30 Dipolyhydroxystearate (China, Heavy Colored)
- Product Code: 6229
water-in-oil emulsifier (HLB 5.5) with good performance, high silicone support, non-condensed liquid texture
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
| Test Name | Specification |
|---|---|
| Appearance | Cream |
| Colour | Yellow to dark yellow |
| Odour | Characteristic |
| Density | 0.89-1.02 |
| pH | 5.5-6.5 |
| Solubility | Insoluble |
| Melting Point (C) | 80 Min |
PEG-30 Dipolyhydroxystearate It is a water-in-oil emulsifier (HLB 5.5) with good performance. with the highlights as follows:
1. Up to 50% of Cyclomethicone can be accommodated in a formula.
2. Able to combine formula at room temperature (by warming PEG-30 Dipolyhydroxystearate is melted and then used to cement the formula. at room temperature)
3. Provide a liquid formula that is not thick, suitable for coordinating formulas that want to emphasize liquidity, such as Body Milk or make-up that requires liquid texture, sunscreen that requires liquid texture.
4. Able to combine in formulas with high ethyl alcohol up to 25%
5. Able to formulate a formulation of glycerin in oil, glycol in oil (does not require water in the formula, only glycerin and oil or glycol and oil).
6. Good resistance to acid, alkali and electrolyte.
*For formulas that are Water in Oil (have both water and oil by using PEG-30 Dipolyhydroxystearate coordinate recipe) suggest more Magnesium Sulfate 1% to improve formula stability reduce the chance of stratification
*Adding a High-HLB emulsifier such as Polysorbate 80 in a small amount of water (0.25-0.5%) before the water-oil bonding. will help the water-oil synchronization easier to do Formulas will coordinate faster. and reduce the spinning power to save energy used in production
Use: It is a binder of water to oil and silicone.
Mixing method: Mix in the oil or silicone, and while blending the oil/silicone, gradually add the water. Continue spinning until well blended.
Usage rate: 0.5-3% (2.5% recommended for most water-in-oil formulations)
Product characteristics: Thick, brown cream with a melting point of about 32-40 degrees.
Solubility: can be dissolved in oil, silicone
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 2 years
INCI Name : PEG-30 Dipolyhydroxystearate
Examples of products used PEG-30 Dipolyhydroxystearate
Clarins SPF50/PA+++ Everlasting Cushion Foundation
LANCOME ROSE SUGAR SCRUB
Vichy COLLAGEN SPECIALIST
LANCOME Absolue Revitalizing & Brightening Soft Cream
LA ROCHE-POSAY ANTHELIOS AC SPF 30 MATTE FLUID ANTI-SHINE
KIEHL'S Super Fluid Daily UV Defense Sunscreen Broad Spectrum SPF 50+
Be the first to review this product :-)
Example recipes using this ingredient:
- › lock_outlineNight Cream by heartapotheca
- › lock_outlineSolar
Recommend Lab-Service
| Lab Service | Price |
|---|
PEG-30 Dipolyhydroxystearate (China, Heavy Colored)
water-in-oil emulsifier (HLB 5.5) with good performance, high silicone support, non-condensed liquid texture
PEG-30 Dipolyhydroxystearate It is a water-in-oil emulsifier (HLB 5.5) with good performance. with the highlights as follows:
1. Up to 50% of Cyclomethicone can be accommodated in a formula.
2. Able to combine formula at room temperature (by warming PEG-30 Dipolyhydroxystearate is melted and then used to cement the formula. at room temperature)
3. Provide a liquid formula that is not thick, suitable for coordinating formulas that want to emphasize liquidity, such as Body Milk or make-up that requires liquid texture, sunscreen that requires liquid texture.
4. Able to combine in formulas with high ethyl alcohol up to 25%
5. Able to formulate a formulation of glycerin in oil, glycol in oil (does not require water in the formula, only glycerin and oil or glycol and oil).
6. Good resistance to acid, alkali and electrolyte.
*For formulas that are Water in Oil (have both water and oil by using PEG-30 Dipolyhydroxystearate coordinate recipe) suggest more Magnesium Sulfate 1% to improve formula stability reduce the chance of stratification
*Adding a High-HLB emulsifier such as Polysorbate 80 in a small amount of water (0.25-0.5%) before the water-oil bonding. will help the water-oil synchronization easier to do Formulas will coordinate faster. and reduce the spinning power to save energy used in production
Use: It is a binder of water to oil and silicone.
Mixing method: Mix in the oil or silicone, and while blending the oil/silicone, gradually add the water. Continue spinning until well blended.
Usage rate: 0.5-3% (2.5% recommended for most water-in-oil formulations)
Product characteristics: Thick, brown cream with a melting point of about 32-40 degrees.
Solubility: can be dissolved in oil, silicone
Storage: can be stored at room temperature But close the lid of the bottle tightly. and protected from sunlight or heat, the product has a shelf life of at least 2 years
INCI Name : PEG-30 Dipolyhydroxystearate
Examples of products used PEG-30 Dipolyhydroxystearate
Clarins SPF50/PA+++ Everlasting Cushion Foundation
LANCOME ROSE SUGAR SCRUB
Vichy COLLAGEN SPECIALIST
LANCOME Absolue Revitalizing & Brightening Soft Cream
LA ROCHE-POSAY ANTHELIOS AC SPF 30 MATTE FLUID ANTI-SHINE
KIEHL'S Super Fluid Daily UV Defense Sunscreen Broad Spectrum SPF 50+
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |
Cart
No products
Subtotal:
฿0.00
฿0.00
Total :