Calcium thioglycolate Used in hair removal products (hair removal) by reacting with the hair, causing the hair or hair to become damaged and fall out.

Calcium thioglycolate Used in hair removal products (hair removal) by reacting with the hair, causing the hair or hair to become damaged and fall out.

Please study the instructions for use carefully before use.

1. Calcium thioglycolate There is a natural smell of the substance. Formula of the finished product It is necessary to use perfume adequately. to mask the smell

2. Calcium thioglycolate can easily oxidize. Please avoid heat over 40 degrees (recommended 30 degrees) and air.

3. Packaging the finished product after mixing. It should be in packaging that can protect the formula. Do not let it come into contact with the air. such as vacuum tubes

4. The formula must not contain Urea and Sorbitol because they will react with Calcium thioglycolate. and a color change occurred

5. Water used for mixing formulas containing Calcium thioglycolate It must have the highest purity because if it has a metal charge, Calcium thioglycolate A color change will occur. Born purple

6. Calcium thioglycolate Can irritate the skin Do not use more than the specified level (recommended 5-7.5%, with the FDA prohibiting use more than 10%) by those who use the finished product. You should know how to use it in detail. Instructions for using the formula are below.

7. Calcium thioglycolate Must be used together with Calcium hydroxide by mixing in a 5:1 ratio, such as Calcium thioglycolate 7.5% with Calcium hydroxide 1.5%.

8. The formula should avoid any type of Polar Solvent, such as any type of LipidSoft, any type of natural oil, as it will cause the precipitation of Calcium thioglycolate. 

9. Appropriate packaging materials for successful formula packaging should use glass, ceramic, if it is plastic. Must use Polyethylene (PE) plastic only.

10. In the mixing process, Calcium thioglycolate and Calcium Hydroxide are first dispersed in Non-Polar Oil and then mixed with the formula.

Formulas should be used ActiveProtec™ OX at 0.6% to help prevent formula discoloration.

Sample formula: Hair Remover Lotion, hair removal lotion

1. Butter Cream Maker 4% serves to coordinate the formula. and create a creamy texture

2. Dimethicone 5% to make the formula smooth and easy to spread on the skin in the area that needs hair removal.

3. Glycerin 5% To make the formula smooth Easily spread on the skin in areas where hair needs to be removed.

4. Mineral Oil or Non-Polar Oil of any kind 5%

5. Cetearyl Alcohol 3% provides a thick formula.

6. Calcium thioglycolate 7.5% has hair removal effects.

7. Calcium hydroxide 1.5%

8. Sodium Hydroxide or Potassium Hydroxide is used to adjust the pH value to make the formula have a pH in the range of 12-12.5.

9. Disodium EDTA 0.1%

10. Mild Preserved Eco 1%

11. Water, the rest

Mixing steps: Heat 1,2,3,5 to 70-80 degrees and blend until smooth. It's part of the oil, mix 9,10,11 together. Then heat it to a temperature similar to the oil portion and slowly add it to the oil portion. Blend until combined. You will get a creamy texture. Leave it to reach a temperature of about 30 degrees, then blend 4,6,7 together. Then add it to the cream. Blend well. Measure the pH value. If it is still lower than 12, add 8 a little at a time to adjust the pH value to be in the range of 12-12.5.

How to use hair removal products with Active substance: Calcium Thioglycolate

1. Patch-test in the crook of the leg. Apply a thin layer and leave it for 5 minutes and see the results. To make sure there are no allergic reactions. Please have allergies. Please refrain from using.

2. Take a cloth soaked in warm water and apply it to the skin in the area where you want to remove hair. To help open the pores and the formula can remove hair with full efficiency

3. Apply and leave on the skin for 5-15 minutes or depending on desired effectiveness.

4. Wipe off with a damp cloth. Please wipe it clean after use. This will prevent the formula from remaining on the skin and continue working.

5. Apply cream to reduce irritation and moisturize the skin. To reduce side effects of Calcium Thioglycolate

Usage: for hair removal products, hair

How to mix: Mix in water. Please study the usage details above.

Usage rate: 5-7.5%, the formula must have a pH range of 12-12.5 (FDA prohibits use of more than 10.0%).

Product appearance: white powder

Solubility: Can dissolve in water

Storage: Can be stored in a cool, dry place. Completely protected from sunlight, heat , and air. The product has a minimum shelf life of 2 years.

INCI Name : Calcium thioglycolate

Olay Smooth Finish Facial Hair Removal

Nair Sensitive skin hair removal cream