for bottle cap size 17-50mm

Can accommodate all types of envelopesFormed successfully. Only the seal at the bottom of the envelope is left

Can accommodate all types of envelopesFormed successfully. Only the seal at the bottom of the envelope is left

For packing products that require precision formula and small quantities such as lip stick, make up in various forms

Manual lipstick filling machine with mold

20L pot

(This machine is an assembly order. Samples of boxes and products to be packaged must be sent. to assemble the machine to be suitable for

packaging and product characteristics)

injection bottle capping machine Injection bottle cap clamps 

cream filling machine (slurry)Automatically seal plastic bags With a dotted notch for tearing and a concave edge.

(This price includes a filling cone) (This price includes a 5-100ml cream dispenser. )

The smallest envelope width 2.5 cm. The maximum envelope length 17 cm

Automatic vacuum leak tester

Digital Control (can be calibrated and issued a calibration certificate for use in GMP/ISO systems)

Use with air pump

To release the cap to the bottle automatically before entering the capping machine Conveyor system

cream filling machine cream filling machine Automatic system, put the sachet, squeeze the sachet, use the pressure from the wind (pneumatic) made of stainless steel grade 304 for the part that comes in contact with the cream

(Spare parts) Adapter digital liquid filling machine

Automatic liquid filling machine (conveyor)

Automatic cream filling machine (conveyor belt)

Perfume bottle cap capping machine 13-22mm (hand press)

Iron foil cover: PE / HDPE (100 pieces / pack)

Use the iron to iron it next to the mouth of the bottle.

Plastic sheet, plastic film, cover the cream surface, cover the cream

Produced according to the size and thickness required.

Duration 10-15 days

Minimum quantity 10,000 pieces, standard thickness 0.15 mm.

(Spare parts) bag seal clamp Sachet packing machine

(Spare parts) Sachet packing machine Automatic bag sealer, cone filling machine stainless steel 304

Can sealer For bottle caps size 45-130mm.

Liquid filling machine Suitable for containing liquids Can use With liquids used for consumption Or eat (drink, juice) Corrosion resistant type It can contain oil, ester or light solvent.

Weight control system Packed according to the weight specified on the display (up to 3kg).

Loading capacity 5 liters / minute

Cutting machine for cutting film using heat to cut Adjustable time from 0-3 seconds

Tube Sealing Machine Tube bottom sealing machine Ultrasonic system With automatic tube-tip cutting

system Semi automatic For bottle caps of 10-50 mm.

The device can vibrate in the to increase accuracy And does not allow the powder to adhere to various points

Material Stainless steel (plastic weighing pan)

Use a pneumatic system for sucking liquids. And spray liquid Put in the desired container or packaging.

Packing size 5-100ml

Parts in contact with the product are made of Stainless 304.

Hot air tunnels for shrink film or shrink film. Temperature control with digital system

Tunnel size (not outer body size): 800x400x200mm

system Semi-automatic for round containers

Liquid filling machine Suitable for containing liquids At normal viscosity To medium viscosity liquids (laundry detergent, dishwashing liquid, floor cleaner) Can use With liquids used for consumption Or eat (drink, juice)

Corrosion resistant type It can contain oil, ester or light solvent.

Loading capacity 3.5 liters / minute x 2 nozzles

Continuous sealing machine

Air bag making machine Supports a wide variety of bags Both the width 200MM and the 400MM

Cream filling machine Cream filling machine   Hand press system: 10 liters container can contain 5-50ml each time (per press).

The parts that come in contact with the cream are made of Stainless 304.

foil sealing machine Electromagnetic (induction) system can seal the bottle between sizes. diameter 20 – 85 mm., speed about 5-20 bottles per minute.

(This machine is an assembly order. Samples of boxes and products to be packaged must be sent. to assemble the machine to be suitable for

packaging and product characteristics)

Automatic vacuum leak tester

Digital Control (can be calibrated and issued a calibration certificate for use in GMP/ISO systems)

Use with air pump

To release the cap to the bottle automatically before entering the capping machine, belt system

For long lids, dropper lids that must be set in the right direction.

Can accommodate all types of envelopesFormed successfully. Only the seal at the bottom of the envelope is left