using Oil-Fix is to be blended until completely dissolved in the formula. If spinning is not enough and incomplete solubility May be left as a small powder floating in the formula and can clog. But if completely dissolved, it will not clog. The study team recommends 2 alternatives. 1. Try to reduce Oil-Fix to 0.5% (but please test Stability) 2. Select LipidSoft™ Fix instead of Oil-Fix1. After doing it, the layer is separated after 2-3 days, so I put oil fix into it to separate the layers better. But I don't know if this is causing clogging
Sunscreen in the past There will be a steel ball in the bottle. And recommend that users always shake before use. due to the separation problem Members may choose to do that. But the sun protection may be reduced a bit.2. If I don't use oil fix, will the separating cream still work well? by shaking before use, etc.
The stratification occurs because the formula is difficult to combine because of the various powders and oils. It is therefore normal for a formula like this to be layered without a helper, for example Oil-Fix or LipidSoft™ Fix3. Is the stratification caused by too much or too little of any ingredient? Where do I need to adjust the formula?
. Recommended to reduce the use rate. and use the heat while blending to melt together and take longer to blend Since the ingredients in this list are very small in powder size, they cannot be seen with the naked eye.How to see if the oil fix is completely dissolved, the normal husk will blend together until there is no powder left. But with a thick creamy texture, I don't know if it's completely dissolved or not. Or must be mixed in the process of using heat
LipidSoft Fix tested at a rate of 5% (instead of LipidSoft CC ) [q uote]Since the sunscreen base is already quite used, adding LipidSoft Fix ] LipidSoft Fix to add oiliness? Saw written that it is suitable for dry skin peopleLipidSoft Fix recommended to use instead of oil fix from formula, use only 1% is enough? Go into the properties and do not see any mention of helping to coordinate the oil. Is it another feature? or we use more instead of LipidSoft CC 5% would be good
It is possible that using Water-in-Oil EZ 2.5% is not enough, may have to try to increase 3-4%Try it. LipidSoft Fix at 3 and 5% did not survive - The product is viscous - if it is set for several days, it will be layered anyway, try oil fix and dissolve it with LipidSoft CC Use the heat at 70% and see that it melts together until it's clear, no debris. - Thick texture without splitting layers. สิวอุดตัน
I don't know if members have tried this product yet. And found that there is a problem with blockage or not? Mixing is easy as it is not an emulsion.spectraban sc use BEMT http://www.myskinrecipes.com/shop/spf-sunscreen/772-bis-ethylhexyloxyphenol-methoxyphenyl-triazine.html]BEMT[/url BEMT and DHHB base ซิลิโคน no water no กันเสีย Smooth as a primer and he claims it's perfect. with sensitive skin Because it doesn't clog, the formula is as follows. How much should I use?