Cosmetics Formulation Development


ช่วยพิจารณาสูตรเซรั่มด้วยครับแยกชั้นตลอดเลย

Need help and get help on cosmetics formulation development

Please consider the serum formula as well. Separate layers all the time.

Postby sakul_wudangzhan » Tue Apr 04, 2023 11:35 pm

Please consider the serum formula as well. Separate layers all the time. After setting it aside for 3-4, it will separate the layers. I don't know what caused it. I can't fix it. Please advise. I have done it 3-4 times and I can't fix it. With the following formula:

1. Distilled water = 43.25%

2. Disodium EDTA = 0.2%

3. Allantoin = 0.2%

4. Vitamin A Retiny Acctate = 0.10%

5. Alpha Arbutin = 1%

6. Vitamin B3 Niacinamide ( Safe-B3 TM) = 1%

7. GlucoBright TM ( Acetyl glucosamine ) = 1.5%

8. 4MSK (Potassium Methoxysalicylate) = 0.8%

9. Tranexamic Acid = 2%

10. GABA Natural (natural GABA) = 0.5%

11. 4D Hyaluronic Acid = 2%

12. Natural Betaine = 1%

13. Collagen HP = 1%

14. Apple Stem Cell Extract = 0.5%

15.ActiveProtec™ OX = 0.30%

16. Licorice Extract ( Licochalcone A 1%) = 1%

17. Lactic Acid (AHA) 90% = 1%

18. Repair Activator TM = 2.5%

19. Natto Gum = 2%

20. 1,2-Hexanediol (Super-Purified, Odorless) = 2%

22. Moisturizing Honey = 1%

23. Hydrolyzed Milk Protein = 1.5%

24. Pal-GHK , Pal-GQPR = 2%

25. MOIST24 = 1%

26.Pep®-Radiance ( Nonapeptide-1 ) = 0.5%

27. Lemon Peel Bioferment ( Lemon Skin ™) = 0.5%

28. Lotus extract = 0.5%

29. Jojoba Oil = 0.5%

30. Squalane = 0.5%

31. Avocado Oil = 0.2%

32. Cyclopentasiloxane (Low-Odor Cyclomethicone ) = 8%

33.Koji Acid Dipalmitate = 0.045%

34. lipid soft lite 1% (to dissolve Protec™ OX)

35. Silky Serum Base Plus (Face/Eye, Oil) = 16%

37. Magnesium Sulfate (High Purity) = 2%

38. Mild Preserved Eco ™ ( Preservative-Free ) = 1%

39.Protec™ OX = 0.05%

40 Sweet Orange Peel Oil = 0.1%


method

A. Melt the lipid soft lite Protec™ OX by heat and set aside.

B. Take out 20% of the water and heat it with the oil mixture.

C. Dissolve Koji Acid Dipalmitate in section A and leave the temperature between 40 - 45 degrees.

D. Add Cyclopentasiloxane (Low-Odor Cyclomethicone ) and Silky Serum Base Plus (Face/Eye, Oil) to point C.

E. Heat item B and item B to a similar temperature, about 40 - 45 degrees, and pour the water into the oil. with people to match all the time

F. Gradually fill up until it's all gone, with people constantly stirring. Then take it to blend with a cream blender until it cools down to close to room temperature.

G. Then gradually add the rest of the ingredients while stirring continuously until the rest of the compound is used up.

Note 1. Any substance that can't withstand heat, I separate it and put it later.

2. After churning, 3 - 5 minutes after adding all ingredients until the consistency is thickened.

Please help me to consider Finished, leave it for 3-4, will separate the layers, can't fix it, many rounds, then pay until it's gone bankrupt. please advise Where did I go wrong?

sakul_wudangzhan
 
Posts: 60 (Click to watch)
Joined: Fri May 14, 2021 9:54 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Please consider the serum formula, separate layers all the time.

Postby sakul_wudangzhan » Thu Apr 06, 2023 10:59 pm

In addition, from the above formula, when blended into a cream and serum texture that has been searched (using a rate of 1%), preservatives are used as Mild Preserved Eco ™ ( Preservative-Free ). The texture of the serum and the liquid and it does not seem to be able to blend together. Then there was separation. I do not know from what

sakul_wudangzhan
 
Posts: 60 (Click to watch)
Joined: Fri May 14, 2021 9:54 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Please consider the serum formula, separate layers all the time.

Postby staff » Tue May 02, 2023 7:19 am

hello


The word fills the part of the water. Pour into the oil and stir all the time.


- I don't know what kind of blender to use. or the hand

- Gradually add the water a little at a time. while spinning continuously Or just fill it up?

Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0

Re: Please consider the serum formula, separate layers all the time.

Postby sakul_wudangzhan » Thu May 11, 2023 8:00 pm

- Add water little by little

- Use a blender, Homo.

sakul_wudangzhan
 
Posts: 60 (Click to watch)
Joined: Fri May 14, 2021 9:54 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Please consider the serum formula, separate layers all the time.

Postby sakul_wudangzhan » Thu May 11, 2023 8:01 pm

sakul_wudangzhan wrote:

- Add water little by little

- Use a blender, Homo.

- Add water little by little

- Use a blender, Homo.

sakul_wudangzhan
 
Posts: 60 (Click to watch)
Joined: Fri May 14, 2021 9:54 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Re: Please consider the serum formula, separate layers all the time.

Postby staff » Sun May 14, 2023 10:24 pm

hello


Please remove these 3 items from the recipe first.


8. 4MSK (Potassium Methoxysalicylate) = 0.8%

15.ActiveProtec™ OX = 0.30%

17. Lactic Acid (AHA) 90% = 1%


When finished mixing Got the cream consider adding

This is because 4MSK and ActiveProtec™ OX are highly electrolyte.

Lactic acid has a high effect on pH.

Staff - MySkinRecipes
staff
 
Posts: 17072 (Click to watch)
Joined: Mon Mar 19, 2012 9:38 pm
Recipes Count: 0


Return to Cosmetics Formulation Development