Hello
This formula is to be careful about electrolyte
DMAE will make synchronization more difficult. which may require an increase in the proportion of
Satin Cream Maker If the formula is too runny (Too liquid formula is at risk of separation. of water - oil) must try to mix and gradually increase the proportion of
Satin Cream Maker can be added to the recipe later. Until the appropriate thickness. 4. In the absence of oil. It is also recommended to put
Satin Cream Maker or use
Gel Maker others in the recipe to help adjust the formula to not be too runny. because it is too liquid Some ingredients are dispersed in water. Instead of being dissolved in water, for example
Skin-mimic will likely precipitate. If adjusted to have some viscosity It will help a lot about the stability of the formula. 5/6
Phospholipid located at
Skin-mimic™ (Skin Barrier Restoration) is not functioning.
นำพา (or at least the manufacturer has put
Phospholipid to act.
นำพา ), but serves to nourish the skin.
นำพา should contain
Phospholipid at least 1% if there is no oil in the formula. or too little oil distribution of
Phospholipid may be problematic, at least twice the oil
Phospholipid eg use
Phospholipid 1% should have 2% washing oil 7. Depending on the formula, it takes about 7-60 days for the first production cycle. Because there will be an adjustment / stability test procedure. before the actual production, including after the actual production has to be checked If there is a problem But after the first round, the next round will have a certain time, which is about 5-10 days, depending on the production queue at that time.