- Don't know
Moringa Oil /
Evening Primrose Oil /
Jojoba Oil /
Sweet Almond Oil . Which one is good to use? And how do you know which oil helps thicken the cream? (Use
Satin Cream Maker helps to combine the water and oil.) Answer: To make the cream thick or liquid, use
Satin Cream Maker The amount increased by 0.50% - 1% can thicken the texture. and in addition to using heavy oils such as
Jojoba Oil ,
Olive Oil or will save cost in formula Choose a synthetic oil with a good coating, eg
LipidSoft Film ,
LipidSoft™ Heavy. How do you know which one is a Chelating Agent? To prevent ions in the water, there will be
Disodium EDTA - I understand that if you use the specified emulsifier, The heat of mixing, that is, a mixture that dissolves in water and that dissolves in oil. The specified temperature must be high and the temperature must be the same when mixed. with some oil-soluble substances at high temperatures such as
Ceramide 2 when heated.
Ceramide 2 dissolved, can wait to cool before mixing in water-soluble substance. Is it not necessary to give the same temperature of both solutions? Answer : Bring
Ceramide 2 is heated to dissolve in oil or Glycol groups such as
Butylene Glycol ,
Ethoxydiglycol at 70 degrees until
Ceramide 2 dissolved, separate this from in the formula Wait for the temperature to drop below 40 degrees, then mix the oil in the formula. Using Natural Bee wax can be used with Emulsifier that does not use heat such as
Satin Cream Maker to help thicken the cream and Can I apply a coating for dry skin? If so, which Natural Bee Was should I use and what percentage? Or is there any substance that can be added to the cream used?
Satin Cream Maker to thicken or coat the cream. Good or similar to Butter Cream because it is not convenient to use Butter Cream because it requires heat to mix it. Answer: Wax group is suitable for use with Emulsifier that requires heat such as
Butter Cream Maker ,
Soft Cream Maker for coating and thickening the formula. which of course cannot be used in
Satin Cream Maker if you want a coating ingredient. In the formula suggest
LipidSoft Film - If in the beginning, do not want to invest in IR
Thermometer that are sold on the web, for example, just want to melt
Ceramide 2 in oil, please suggest a simple technique for mixing or
เทอร์โมมิเตอร์ cheaper version Answer : To dissolve
Ceramide 2 heat until you see that
Ceramide 2 dissolves in oil or Glycol group, when it dissolves and then stops heating. and wait for it to cool or warm a little It can be used. Evening Primrose oil /
Moringa Oil deteriorates when heated to melt.
Ceramide 2 or not?
Ceramide melted, cooling the oil and mixing it with the soluble part has no effect as it is considered
Ceramide 2 has dissolved in
Moringa Oil , yes or no? Answer : It is recommended to use Glycol group to dissolve
Ceramide 2 because
น้ำมันธรรมชาติ Moringa Oil can withstand heat only 60 degrees
Vitamin B12 added 5%, very dark pink. Isn't there any solution other than reducing the quantity? In addition to reducing the amount Try to find ingredients that act similarly and do not affect the color of the formula. You can add more and reduce the amount
Vitamin B12 left 1-2 % which will be a light pink Read in one thread, know that the web has a formula
Copper Peptide Serum but I don't know where it is, can you give me a link? Answer : Is this formula? I recommend roughly as follows -
น้ำกลั่น = 93% -
Hyaluronic Standard 0.5% +
Hyaluronic Nano 0.5% -
Copper Peptide = 3%. -
Laurocapram = 2% -
Phenoxyethanol SA = 1% How should I clean Bigger, dropper, glass rod and stir? Can it be washed with dishwashing liquid (smell/residue when used?) or boiled in hot water? Please suggest how to clean as well. Answer: Usually, wash with detergent until it can remove various stains. No problem. - I encountered a problem with stains with cream gel (both mixed and non-oiled) every time. What's the cause? How to prevent Or is it normal for the gel texture that when applied repeatedly, it will stain? because when mixing cream without using
สารสร้างเนื้อเจล but use
Satin Cream Maker I rarely encounter this problem. Is this normal or not? Answer: This problem is mostly caused by spinning at an improper speed. Or use the duration of the spinning is not long enough. If you want the texture of the gel to come out smooth, beautiful, without stains, it is recommended to read how to mix each type of gel thoroughly. - If there is a mixture of
น้ำกลั่น in the formula too little will be effective. How/or not? There is a suggestion that
น้ำกลั่น in the formula must not be less than a percentage or not? or if we add too much active substances dissolved in water, leaving
น้ำกลั่น in the formula too little will be effective. How to lose/? Answer: Having
น้ำกลั่น in too little formula, what effect? First of all, the formula texture is sticky and gooey, making it unappealing to use. The next, for example, If it is a day cream, it should not be
น้ำกลั่น less than 70% and if it is a night cream, it should not be
น้ำกลั่น less than 60%. Finally, each emulsifier will have details telling you that it can contain no more than a percentage of the oil content in the formula. If there is more oil than specified, it may cause the cream to separate layers. Thank you.