Foundation/BB Silk (please consider adding
Zinc Oxide 200nm EasyDisperse™ in formula to increase SPF and protect against both UVA/UVB):
Silicone Gel Ultra Clear 70% Titanium Dioxide Nano EasyDisperse™ 3%
Silk Mica Powder ชนิดด้าน (Matte) 17%
Cyclomethicone5%
Silicone Blender 4%
SiliSolve™ 1% I've tried this recipe the 1st time I followed the recipe and the result was good so I did it again the 2nd time add
Zinc Oxide 200nm EasyDisperse 3% off
Silicone Gel from 70% to 67% and
Silk Mica Powder ]
Silk Mica Powder 17% went down to increase another powder I think that will help the texture of the foundation better. The powder included is as follows: 1.
Silk Mica Powder 5% 2.
MatteSilica XL 3% 3.
Nylon-12 2% 4.
Polymethylsilsesquioxane 2microns 7% is 17% of all 4 powders. The result is not satisfactory. is very thick When applied, the skin will feel stiff and flaky. Therefore, I would like to ask as follows. 1. The cream is very thick and causes flaky because of the powder that we change into? But put a total of 17%, which is the same as the
Silk Mica Powder 17% 2.Insert
Zinc Oxide 200nm EasyDisperse by reducing the ratio of
Silicone Gel is this right? 3.If we replace Titanium Dioxide Nano EasyDisperse™ 3%,
Zinc Oxide 200nm EasyDisperse 3% to
Titanium Dioxide 15nm Liquid 3%,
Zinc Oxide 35nm Liquid 3% interchangeable? 4. How we change
สารกันแดด from powder to liquid helps the cream become more runny and flaky. right? And if the answer is not related, then I would like to ask Is there any powder that can cause flakes? As for the powder I'm not sure which one to wear and how much. But the total of all four is 17%.