Hello, the formula can be mixed. But the team has various suggestions about the formula as follows. 1. The formula is not too greasy because of the oil in the formula. for dry skin The use of oil about 10% of the formula is considered to be a low level. In addition, the oil group ingredients in the formula as mentioned by members are actually not oily. just a mix Mix it with other oils in the recipe. that's all according to the formula that members have informed If you feel gooey will be caused by the use
Vitamin B5 is quite high. Even if the ExtraLite type was chosen, the team suggested only 3% of the results could be expected.
Vitamin B5 2. The formula is using
Hi-Quercetin which is dark in color and is suitable for Use only at night If members use this formula during the day as well. It is recommended to cut may consider choosing a group of ingredients
ลดการระคายเคือง other types instead. 3. For relatively dry skin. Due to the use of Retin-A, the study team recommends adding a group of ingredients that can be a good coating. to reduce the water loss of the skin which will help to work with
moisturizer Soluble As the members have selected many items. to be able to work more perfectly And the skin will be able to recover moisture faster, however, the ingredients that can coat this well. will look like oil And some will have to use heat to melt into the formula. For example, the hot melt type is
Ezerrawax™ and a heat-less example
Cerasoft™ ,
Siliwax Lite or maybe
น้ำมันธรรมชาติ with a bit heavy texture, such as
Jojoba Oil etc.
for members to add to the formula in the last step. Blend or stir to match the recipe. The formula must contain both water and oil, give
Phospholipid is compatible with the formula. By the member's formula, there is no direct oil. If using
Phospholipid recommended to add
Cerasoft™ ,
Siliwax Lite or
Jojoba Oil into the formula so that
Phospholipid can fit with formula?
สารกันเสีย can be added in the last step.
3.In this case use
AnyGel™ Also I had to mix
AnyGel™ In which step is it correct?
AnyGel mix with water first. It will be easiest because if using heat to help. will dissolve much more easily If other ingredients are added to the water You may be concerned that some ingredients are not heat resistant, so mix
AnyGel with purified water first. Copy the instructions from the web page.
Instructions for use
AnyGel (Credit: Mr. beautyxguide) For easy solubility 1. Heat the pure water to 70-80 degrees 2. Gently sprinkle
AnyGel into warm water and stir or blend or mix When they match well, then sprinkle
AnyGel 3. Stop adding
AnyGel into one because it will coagulate and will be harder to melt