Dear Myskin team, we have a big problem with the oil in water cream formulation. (There is a sample picture) Previously, we made 14 Batch, no problem. The cream is perfectly smooth. All the ingredients are purchased from Myskin and the recipe is the same. The ingredients are the same. We tried several batches to figure out why. It can be summarized as follows: 1. Spinning speed => we try high rpm and still lose. Previously, yes, the cycle was not high, it was still able to coordinate = not the reason 2. Pour the mixture at too different temperatures => tried to adjust the temperature to equalize = not the cause, normally poured at the same temperature already 3.
Thermometer may be broken => I bought a new one = not the reason 4. Too little creamy binder => We use PEG-40 8% as the main body. With the other 2%, I used this formula all the same before, no problem = not the cause. Is it possible that some substances may deteriorate even with new batches? Please help me find the cause. (You can see from the history of ordering.) Actually, we tried to do it since the middle of the year, almost 40 Batch total, until all the recipes are complete, no problem. But all of a sudden, this kind of confusing problem arises. It's dark now