Fragrance Formulation Development


ใช้ 12H fixative ผสมน้ำหอมเเล้วขุ่น

Need help and get help on fragrance formulation development

Use 12H fixative mixed with perfume and it becomes cloudy.

Postby thanaboon benz33 » Fri Jul 26, 2024 12:52 pm

Hello, I just mixed perfume by using 12H Fix ative mixed with LipidSoft in half ratio, for example 12H Fix ative 20 g. mixed with LipidSoft 40 g. using heat 70 degrees. The results are quite good. When mixed with a good odor fixing agent It is a clear, slippery substance.

Next, I prepared the perfume essence with the finished ratio. Come mix it with alcohol first, with 20% perfume, 70% alcohol, and 12H Fix ative 5% DI 5%. At first, I mixed the perfume essence with the finished scent. W Water is mixed with alcohol first. Found that the color was quite clear. But when the water was mixed with 12H, it was found that the substance was quite turbid, as shown in the picture. Then, I forced myself to try adding DI again, it became even more turbid, and found that there were sticky white lumps formed. which I try to stir quickly and for a long time Returns to the image of the attached file. I'm not sure if I'm doing the wrong steps. Please give me some advice. Or the formula mixed with 12 H is too concentrated. But when mixing with perfume, I use normal room temperature. I don't know if there is an error in any step. Please advise. Thank you.

thanaboon benz33
 
Posts: 1 (Click to watch)
Joined: Thu May 02, 2024 3:45 pm
Has thanked: 0 Times
From thanks :: 0 Times
Recipes Count: 0

Return to Fragrance Formulation Development